Water Treatment

Boiler / Cooling Tower Chemicals

Specialized formulatory products for efficient maintenance of boiler units and chiller plants of industries.

View All Water Treatment Chemicals
Corrosion / Scale Control for Boiler +
  • Corrosion Scale Treatment Boiler - RXSOL-42-4029-025
  • One Shot Universal LiquiTreat - RXSOL-50-5001-020
  • MULTIPLUS BWT - RXSOL-50-5011-020
  • Sludge Conditioner - RXSOL-50-5008-020
  • Oxygen Scavenger Plus - RXSOL-50-5022-025
  • Condensol Corrosion Control - RXSOL-50-5005-025
Cooling Tower / Chiller Unit Maintenance +
  • RXSOL 2000 Corrosion Scale Inhibitor - RXSOL-40-2000-025
  • Corrosion Inhibitor MULTI Metal Protection - RXSOL-40-4011-025
  • Biocide MICRO Cooling Water - RXSOL-40-4009-025
  • Corrosion Inhibitor Antifoulant - RXSOL-40-4027-025
  • Antiscalant Antifoulant - RXSOL-33-3302-025
  • Cooling Water Test Kit - RXSOL-62-5508-001
Marine Chemicals

Marine Deck Engine Chemicals

One STOP manufacturer for all of vessel's chemical needs - chemicals, test kits, applicators, etc

View All Marine Chemicals
Deck Engine Maintenance +
  • Heavy Duty Degreaser - RXSOL-10-1005-025
  • TPOL Heavy Duty - RXSOL-20-T300-025
  • All Purpose Cleaner - RXSOL-12-1501-020
  • Fuel Emulsion Breaker - RXSOL-70-7003-020
  • Evaporator Treatment - RXSOL-51-6001-020
  • Electrosol Electrical Cleaner - RXSOL-16-1009-025
  • Carbon Remover - RXSOL-16-1003-025
  • Rust Stain Remover RSR - RXSOL-13-1096-025
  • Enviro Degreaser Cleaner - RXSOL-20-3001-025
  • Hand Cleaner Paste - RXSOL-16-1001-001
Ship Hold Tank Cleaning+
  • Slip Barrier Coat HOLD - RXSOL-22-2210-210
  • RXTuff High Foam - RXSOL-22-3019-210
  • Metal Clean Bright HD - RXSOL-20-1011-020
  • Coal Remover RX Hold - RXSOL-22-2215-210
  • RXSOL PCS Pet Coke Cleaner Hold - RXSOL-22-2208-025
  • Acqua Tuff High Foam - RXSOL-22-3033-210
  • Alkaline Safety Liquid - RXSOL-20-2005-026
Raw Materials

Raw Material Chemicals

Ready stock of fast-running chemical raw materials in 6 key locations of India

View All Chemicals
Inorganic / Organic Powders+
  • Caustic Soda
  • Caustic Potash
  • Sodium Nitrite
  • Sodium Bisulphite
  • Sodium Bicarbonate
Detergent Manufacturing Products+
  • Acid Slurry
  • SLES
  • SLS
  • Nonyl Phenol Ethoxylates
Other Products+
  • Hydrochloric Acid
  • Sodium Hypochlorite
  • Phosphoric Acid
  • Mono Ethylene Glycol

Sea Chest Antifoulant Aquasperse

Product Code: RXSOL-16-1599-020

Categories: Engine room Maintenance-16
Product Short Description: Biocide against sea growth in inlets, pipelines and heat exchangers
Product Description:

RXSOL SEA CHEST ANTIFOULANT is a specialized liquid treatment developed to help control marine growth in sea chests, seawater cooling lines, strainers, filter boxes and associated heat exchange systems. It is designed for use in marine seawater circuits where fouling by algae, shellfish, slime and other marine organisms can reduce flow, impair heat transfer efficiency and increase maintenance requirements.

The product forms a protective conditioning effect within the system, helping reduce the attachment and development of marine growth while supporting cleaner internal surfaces and improved operational reliability. Regular use helps maintain circulation efficiency, reduce blockage risk and minimize unplanned downtime.

Product Application:
RXSOL SEA CHEST ANTIFOULANT is recommended for:
  • Sea chests
  • Seawater cooling systems
  • Strainer boxes
  • Filter boxes
  • Seawater pipe lines
  • Heat exchangers
  • Central cooling systems
  • Static or flowing seawater systems
Product Dose:

Ensure all systems are completely free of marine growth prior to applying AQUASPERSE RXSOL. Where required, pre-clean using DESCALING LIQUID EXTRA or RXSOL Safe Acid DESCALEX POWDER. Marine organisms require a surface to anchor; if existing growth is not removed beforehand, it will continue to provide a base for further attachment even after AQUASPERSE RXSOL Sea Chest Antifoulant dosing.

SEAWATER COOLING SYSTEMS
Inject AQUASPERSE into the sea chests using dosing equipment once every two days for a duration of one hour, adjusted according to the seawater flow rate of the system. In harbour conditions or areas with high shellfish activity, increase dosing frequency to once daily.

A concentration of 3 ppm AQUASPERSE RXSOL is adequate for fouling prevention. This corresponds to a dosage of 0.3 litres per 100 tons per hour of seawater flow.

DEEP SEA VESSELS
Dose RXSOL AQUASPERSE into the suction box or strainers at a rate of 0.3 litres per 100 tons of flow, applied over one hour every 48 hours.

COASTAL VESSELS
Meter AQUASPERSE into the suction boxes or strainers at 0.3 litres per 100 tons of seawater flow, distributed over a 24-hour period.

Example:
For a circulating pump capacity of 250 TPH, the required dosage is:
0.3 × 2.5 = 0.75 litres of AQUASPERSE for one hour.

Product Note:

Features and benefits of using RXSOL Sea Chest Antifoulant

  • Helps prevent fouling caused by marine growth
  • Supports cleaner seawater cooling circuits
  • Helps maintain heat transfer efficiency
  • Reduces blockage in strainers and seawater lines
  • Can lower cleaning frequency and maintenance downtime
  • Suitable for routine preventive treatment
  • Easy-to-dose liquid formulation
  • Suitable for deep sea and coastal vessel operations
  • Strong broad-spectrum biocidal activity against bacteria, algae, fungi, and marine microorganisms
  • Prevents blockages in sea water inlets, strainers, filters, and pipelines
  • Protects heat exchangers and improves efficiency by eliminating biofilm
  • Reduces maintenance downtime and cleaning frequency
  • Compatible with common metals found in marine systems
  • Fast acting, suitable for both shock dosing and continuous dosing
  • Non-foaming and stable in sea water salinity
Remarks:

For best performance, the system should be as clean as possible before starting routine antifoulant treatment. Heavy deposits, scale or established marine growth should be removed through suitable cleaning/descaling procedures before application.

General preventive dosing:
Dose into sea chest, suction side, strainer box or designated injection point using suitable chemical dosing equipment.

Typical treatment guidance:
A preventive dose may be applied based on seawater flow rate and vessel operating conditions. Treatment frequency can be increased in harbour operations, warm waters, or areas prone to heavy marine growth.

Indicative example format:
For systems with known seawater circulation rates, dosing can be calculated proportionally per 100 tons/hour of seawater flow.

Important:
Final dosage, frequency and compatibility should be validated by RXSOL technical team before release on TDS/PDS and before onboard use.

Product Tag Identification:

RXSOL SEA CHEST ANTIFOULANT is a high-performance liquid treatment for controlling marine fouling in sea chests and seawater cooling systems. It helps prevent the build-up of algae, shellfish, slime and other marine organisms that reduce flow efficiency and interfere with heat transfer. Regular dosing supports cleaner seawater lines, improved cooling efficiency and reduced maintenance downtime. Suitable for sea chests, strainers, filter boxes, seawater lines and heat exchangers, this easy-to-use preventive treatment is ideal for both deep sea and coastal vessel operations.

Product Useful Area:

Keyword

SEA CHEST ANTIFOULANT manufacturer supplier in Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat Oman

Packaging Size

Supply Location

Sea Growth Treatment Biocide manufacturer supplier in Mumbai, Kandla, Kolkata, Chennai Vizag. Sea Growth Treatment Biocide manufacturer supplier in Fujairah, Dubai, Jebel Ali, UAE. Sea Growth Treatment Biocide manufacturer supplier in Muscat, Sohar, Duqm, OMAN.

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Mina Zayed, Khalifa Port, Kizad, Jebel Ali, Port Rashid, Khor Fakkan, Sharjah Creek, Port of Hamriyah, Mussafah Port, Saqr Port, Dibba Port, Jebel Dhanna, Mina Al Hamriya, and all major UAE ports.