Water Treatment

Boiler / Cooling Tower Chemicals

Specialized formulatory products for efficient maintenance of boiler units and chiller plants of industries.

View All Water Treatment Chemicals
Corrosion / Scale Control for Boiler +
  • Corrosion Scale Treatment Boiler - RXSOL-42-4029-025
  • One Shot Universal LiquiTreat - RXSOL-50-5001-020
  • MULTIPLUS BWT - RXSOL-50-5011-020
  • Sludge Conditioner - RXSOL-50-5008-020
  • Oxygen Scavenger Plus - RXSOL-50-5022-025
  • Condensol Corrosion Control - RXSOL-50-5005-025
Cooling Tower / Chiller Unit Maintenance +
  • RXSOL 2000 Corrosion Scale Inhibitor - RXSOL-40-2000-025
  • Corrosion Inhibitor MULTI Metal Protection - RXSOL-40-4011-025
  • Biocide MICRO Cooling Water - RXSOL-40-4009-025
  • Corrosion Inhibitor Antifoulant - RXSOL-40-4027-025
  • Antiscalant Antifoulant - RXSOL-33-3302-025
  • Cooling Water Test Kit - RXSOL-62-5508-001
Marine Chemicals

Marine Deck Engine Chemicals

One STOP manufacturer for all of vessel's chemical needs - chemicals, test kits, applicators, etc

View All Marine Chemicals
Deck Engine Maintenance +
  • Heavy Duty Degreaser - RXSOL-10-1005-025
  • TPOL Heavy Duty - RXSOL-20-T300-025
  • All Purpose Cleaner - RXSOL-12-1501-020
  • Fuel Emulsion Breaker - RXSOL-70-7003-020
  • Evaporator Treatment - RXSOL-51-6001-020
  • Electrosol Electrical Cleaner - RXSOL-16-1009-025
  • Carbon Remover - RXSOL-16-1003-025
  • Rust Stain Remover RSR - RXSOL-13-1096-025
  • Enviro Degreaser Cleaner - RXSOL-20-3001-025
  • Hand Cleaner Paste - RXSOL-16-1001-001
Ship Hold Tank Cleaning+
  • Slip Barrier Coat HOLD - RXSOL-22-2210-210
  • RXTuff High Foam - RXSOL-22-3019-210
  • Metal Clean Bright HD - RXSOL-20-1011-020
  • Coal Remover RX Hold - RXSOL-22-2215-210
  • RXSOL PCS Pet Coke Cleaner Hold - RXSOL-22-2208-025
  • Acqua Tuff High Foam - RXSOL-22-3033-210
  • Alkaline Safety Liquid - RXSOL-20-2005-026
Raw Materials

Raw Material Chemicals

Ready stock of fast-running chemical raw materials in 6 key locations of India

View All Chemicals
Inorganic / Organic Powders+
  • Caustic Soda
  • Caustic Potash
  • Sodium Nitrite
  • Sodium Bisulphite
  • Sodium Bicarbonate
Detergent Manufacturing Products+
  • Acid Slurry
  • SLES
  • SLS
  • Nonyl Phenol Ethoxylates
Other Products+
  • Hydrochloric Acid
  • Sodium Hypochlorite
  • Phosphoric Acid
  • Mono Ethylene Glycol

HOLD BRIGHT

Product Code: RXSOL-10-1027-025

Categories: Degreaser-10
Product Short Description: Salt Remover, Flash Rust Preventer, and Degreaser
Product Description:

Removes Salt rust protective Degreasing Compound. HOLD BRIGHT is a single component additive that removes salts, prevents flash rust, and degreases surfaces, removing contaminants like oil and blast residue.
Rust Guard Rust Preventive Liquid is an inorganic corrosion inhibitor specially designed for temporary rust protection of ferrous metals after acid cleaning or rust removal processes. Formulated with a proprietory blend, Rust Guard Rust Preventive forms a thin, transparent, and adherent silicate film on metal surfaces that inhibits flash rusting caused by moisture and air.

Unlike oil-based rust preventives, RXSOL RustGuard Rust Preventive leaves no greasy or sticky residue and is ideal for parts that are to be painted, assembled, or stored indoors for short periods. The protective layer does not interfere with welding, machining, or further surface treatments.

This product is free from chromates, non-flammable, and environmentally safer, making it suitable for use in workshops, fabrication yards, and industrial process lines.

Product Application:

Typical Use Case of HOLD BRIGHT is a water additive that prevents flash rusting of wet abrasive-and water-blasted iron and steel surfaces and of dry-blasted surfaces in a pressurised wash down. It effectively removes all salts, including chlorides, sulphates, phosphates, nitrates, etc. and other contaminants, including oil, grease, and blast residues. 

  • As a passivation rinse in steel processing
  • For pipes, tanks, tools, flanges, and auto parts
  • In metalworking shops, shipyards, and fabrication plants
  • Temporary protection before painting or powder coating
Product Dose:

Uses 

 



Note: Water that contains a high concentration of salts, carbonates and/or bicarbonates (i.e. "hard water"), or other contaminants may interfere with the performance of HOLD BRIGHT. Industrial or plant water is often a problem, so should be avoided. In a few areas, even potable ("drinking") water may also be a problem. In most cases "bad" water can be corrected easily and inexpensively. Hard water may also be a problem for some equipment. Consult the manufacturer. In most localities, water treatment on site is accessible and inexpensive. If you are not obtaining the results you expect, it is possible that you have a water problem. Call our technical service staff if you have any concerns or questions about water.


Application Instructions : HOLD BRIGHT is typically used in both blast water and wash down water. It is diluted with water depending on the application, humidity, and level of surface contamination. 100:1 is the most common dilution ratio.

 
Dilution:
 
  • Dilute In high humidity environments with highly contaminated substrates (e.g. steel plate used in ocean service or exposed to 'dirty" air), 50:1 may be necessary for both cycles. 
  • Instruction for use Determine the dilution ratio: With low humidity and a relatively clean surface, 100:1 dilution on the blast cycle
  • And 100:1 on the wash down should be satisfactory.
Application Methods:
  • Spray, brush, or dip the metal parts in the diluted solution.
  • Ensure full coverage and allow to air dry naturally.
  • Do not rinse off after application unless protection is no longer required.
 
Drying Time:
  • Surface-dry in 10–30 minutes at room temperature.
  • Drying can be accelerated with gentle warm air (below 60°C).
Product Note:

 

Feature Benefit
Prevents Flash Rust Stops oxidation immediately after acid pickling or rust removal
Non-Oily, Dry Film Suitable for painting, machining, or further treatment
Chromate-Free Environmentally safer, worker-friendly, non-toxic alternative
Water-Based and Non-Flammable Safe to handle, store, and apply
Easy Application Can be sprayed, dipped, or brushed onto metal surfaces
Improves Paint Adhesion Forms a silicate anchor layer that helps bonding of primers and paints
Low-Cost, High-Coverage Economical to use even at low concentrations
Short-Term Rust Protection Ideal for transit, intermediate storage, or process delay protection

HOLD BRIGHT Prime the surface according to the specification: Priming should be done as soon as possible, before flash rust appears and after the surface is dry. Consult the Primer manufacturer for required surface conditions. Typically, HOLD BRIGHT can prevent flash rust on a freshly prepared surface for 48 hours, or longer with favourable weather conditions, (no rain, ambient temperature above +5°C). These instructions may not cover all circumstances and does not supersede the project specifications. 

Remarks:
Product Tag Identification:
Product Useful Area:

Keyword

Packaging Size

Supply Location

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Mina Zayed, Khalifa Port, Kizad, Jebel Ali, Port Rashid, Khor Fakkan, Sharjah Creek, Port of Hamriyah, Mussafah Port, Saqr Port, Dibba Port, Jebel Dhanna, Mina Al Hamriya, and all major UAE ports.