Water Treatment

Boiler / Cooling Tower Chemicals

Specialized formulatory products for efficient maintenance of boiler units and chiller plants of industries.

View All Water Treatment Chemicals
Corrosion / Scale Control for Boiler +
  • Corrosion Scale Treatment Boiler - RXSOL-42-4029-025
  • One Shot Universal LiquiTreat - RXSOL-50-5001-020
  • MULTIPLUS BWT - RXSOL-50-5011-020
  • Sludge Conditioner - RXSOL-50-5008-020
  • Oxygen Scavenger Plus - RXSOL-50-5022-025
  • Condensol Corrosion Control - RXSOL-50-5005-025
Cooling Tower / Chiller Unit Maintenance +
  • RXSOL 2000 Corrosion Scale Inhibitor - RXSOL-40-2000-025
  • Corrosion Inhibitor MULTI Metal Protection - RXSOL-40-4011-025
  • Biocide MICRO Cooling Water - RXSOL-40-4009-025
  • Corrosion Inhibitor Antifoulant - RXSOL-40-4027-025
  • Antiscalant Antifoulant - RXSOL-33-3302-025
  • Cooling Water Test Kit - RXSOL-62-5508-001
Marine Chemicals

Marine Deck Engine Chemicals

One STOP manufacturer for all of vessel's chemical needs - chemicals, test kits, applicators, etc

View All Marine Chemicals
Deck Engine Maintenance +
  • Heavy Duty Degreaser - RXSOL-10-1005-025
  • TPOL Heavy Duty - RXSOL-20-T300-025
  • All Purpose Cleaner - RXSOL-12-1501-020
  • Fuel Emulsion Breaker - RXSOL-70-7003-020
  • Evaporator Treatment - RXSOL-51-6001-020
  • Electrosol Electrical Cleaner - RXSOL-16-1009-025
  • Carbon Remover - RXSOL-16-1003-025
  • Rust Stain Remover RSR - RXSOL-13-1096-025
  • Enviro Degreaser Cleaner - RXSOL-20-3001-025
  • Hand Cleaner Paste - RXSOL-16-1001-001
Ship Hold Tank Cleaning+
  • Slip Barrier Coat HOLD - RXSOL-22-2210-210
  • RXTuff High Foam - RXSOL-22-3019-210
  • Metal Clean Bright HD - RXSOL-20-1011-020
  • Coal Remover RX Hold - RXSOL-22-2215-210
  • RXSOL PCS Pet Coke Cleaner Hold - RXSOL-22-2208-025
  • Acqua Tuff High Foam - RXSOL-22-3033-210
  • Alkaline Safety Liquid - RXSOL-20-2005-026
Raw Materials

Raw Material Chemicals

Ready stock of fast-running chemical raw materials in 6 key locations of India

View All Chemicals
Inorganic / Organic Powders+
  • Caustic Soda
  • Caustic Potash
  • Sodium Nitrite
  • Sodium Bisulphite
  • Sodium Bicarbonate
Detergent Manufacturing Products+
  • Acid Slurry
  • SLES
  • SLS
  • Nonyl Phenol Ethoxylates
Other Products+
  • Hydrochloric Acid
  • Sodium Hypochlorite
  • Phosphoric Acid
  • Mono Ethylene Glycol

Mordant Pre Treatment Etching Wash

Product Code: RXSOL-18-1092-025

Categories: Paint and Cleaning solvent-18
Product Short Description: Changes colour to black to indicate effectiveness
Product Description:
Mordant Pre Treatment Etching Wash is ideal as a  pre-treatment of new galvanised steel where blasting or abrasion is not possible.
Mordant Pre Treatment Etching Wash may be overcoated with a wide range of protective coating systems.
Mordant Pre Treatment Etching Wash may be used to give adhesion of high temperature coatings to new galvanised steel.
Mordant Pre Treatment Etching Wash changes colour on application to black to indicate the effectiveness of primary treatment.
Not recommended for immersed conditions.  
Product Application:
To get the best results the surfaces to be etched should be sound, clean & dry.
 
Ensure surfaces being painted are dry, and cleaned to remove all contaminants.
 
Before applying your Mordant T Wash Solution ensure you are wearing suitable protection including gloves & eye protection. As with all our products this is a professional product for getting a professional result.
 

How to use Mordant Pre Treatment Etching Wash

 

  • Apply Mordant Pre Treatment Etching Wash & allow to turn black.  Once this has happened, wash with clean water.  This is usually after it is fully dried.  Any areas that havent turned black, (usually due to surface contamination) should be abraded using a suitable abrasive paper, then re-apply, however avoid over application as any pooling may result in the formation of fine brown deposits of copper.  After rinsing with clean water and allowing to dry before priming.

 

  • Very Important  Once the pre-treated Mordant Pre Treatment Etching Wash surface has dried, it should be over painted with the appropriate metal primer within 48 hours or contamination may occur, affecting the end result. 

 

  • Mordant Pre Treatment Etching Wash should be stored between 5 -25 degrees C and when not in use, cans should be kept sealed.  For guidance, Mordant Pre Treatment Etching Wash has a 12 month shelf life from the delivery date in their original containers.
Product Dose:
Product Note:
Remarks:
Product Tag Identification:
Product Useful Area:

Keyword

Packaging Size

Supply Location

Mordant Pre Treatment Etching Wash manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Mordant Pre Treatment Etching Wash at a competitive price from us. We have ready stock of Mordant Pre Treatment Etching Wash in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Mina Zayed, Khalifa Port, Kizad, Jebel Ali, Port Rashid, Khor Fakkan, Sharjah Creek, Port of Hamriyah, Mussafah Port, Saqr Port, Dibba Port, Jebel Dhanna, Mina Al Hamriya, and all major UAE ports.