EGR FLOCCULANT | RXMARINE

Get MSDS Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-40-3105-025

Categories: Sewage Chemicals Treatment-40

Product Short Description: RXSOL EGR Flocculant is a specialized chemical water treatment product typically used in marine or industrial exhaust gas recirculation (EGR) washwater treatment systems to separate suspended solids, soot, and heavy contaminants from wastewater before overboard discharge or filtration

Product Description:

RXSOL EGR Flocculant is a specialized chemical water-treatment product designed for use in Exhaust Gas Recirculation (EGR) washwater treatment systems in marine and industrial applications. It promotes the rapid aggregation and separation of suspended solids, soot, fine particulate matter, and other contaminants present in EGR washwater.

The flocculation process helps convert fine suspended contaminants into larger flocs that can be more efficiently separated through settling, flotation, filtration, or other wastewater-treatment processes.

RXSOL Flocculant is a very effective liquid treatment based on Poly chloride to separate oil residues from bilge water. It is iron-free, and is completely safe to the environment.

Note : The product is to be used as a secondary flocculant along with the cationic primary flocculant for separator effluent oily water unit. the waste water is then treated in an air floatation unit.

Product Application:

Key Benefits

Promotes rapid flocculation of suspended solids
Helps remove soot and fine particulate matter from EGR washwater
Improves solid-liquid separation efficiency
Supports downstream filtration and sludge-handling processes
Helps reduce turbidity in treated washwater
Suitable for continuous or batch EGR washwater treatment systems
Helps maintain efficient operation of wastewater-treatment equipment
Designed for marine and industrial EGR applications

International environmental regulations set strict rules as to the oil content in effluent water from ships. To meet these regulations, a combination of mechanical and chemical cleaning is necessary. Bilge Water Flocculant is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.

Product Dose:

Typical Applications

Marine EGR Washwater Treatment

Exhaust Gas Recirculation systems
EGR scrubber/washwater treatment plants
Marine wastewater treatment systems
Sludge and solids separation systems

Industrial Applications

Industrial wastewater clarification
Suspended-solids removal
Process-water treatment
Sludge conditioning and separation

Recommended Use

The optimum dosage of Galanoclear GLC-20 depends on washwater characteristics, suspended-solids concentration, pH, temperature, treatment equipment, and operating conditions. A jar test or site-specific dosing trial is recommended to establish the optimum dosage before full-scale application.

Note: Actual product specifications, dosage rates, pH range, composition, and discharge compliance should be confirmed from the manufacturer's Technical Data Sheet (TDS), Safety Data Sheet (SDS), and application guidelines.

Typical dose rate: 100 - 500ppm (0.1 - 0.5 litre/m3 of water) In a multistage bilge water cleaning system, Bilge Water Flocculant is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation and normally needs no alteration. If required, dosing can also be controlled by measuring the level in the container.

Product Note:

How It Works

Galanoclear GLC-20 destabilizes fine suspended particles present in EGR washwater and encourages them to combine into larger, heavier flocs. These flocs can then be separated by clarification, sedimentation, flotation, filtration, or other suitable separation equipment.

Product Advantages

The use of an effective EGR flocculant can improve the performance of the overall washwater treatment process by facilitating the removal of fine solids and reducing the load on downstream filters and separation equipment.

Extra Features

Cost-effective bilge water treatment based on specially selected Poly Aluminium Chloride
Iron-free. Completely safe to the environment
Acts by both breaking the oil-in-water emulsion and by building flocs
Helps to meet environmental regulations on oil content. Discharged water contains normally less than 3 ppm oil
Remaining oil sludge can be burned onboard or pumped ashore-contains very little water
Low dosage, economical use
Effective over an extended pH-range. Eliminates the use of pH-stabilising chemicals
Approved by manufacturers of bilge water cleaning systems

Remarks:

Rapid Floc Formation for faster settling and improved clarification.
Liquid Ready-to-Use formulation for easy handling and precise dosing.
Reduces Sludge Volume by enhancing solid-liquid separation efficiency.
Compatible with Multiple Industries, including wastewater treatment, mining, paper, food processing, and chemical manufacturing.

Polymer Flocculant Liquid is a high-performance liquid polymer formulated to enhance the aggregation and settling of suspended solids in water and wastewater treatment systems. It promotes rapid floc formation, improving clarification efficiency while reducing sludge volume. Suitable for a wide range of industrial and municipal applications, it delivers consistent performance across varying water conditions. Its liquid formulation ensures easy handling, accurate dosing, and quick dispersion into the treatment process.

Product Tag Identification:

#FlocculatingAgents_IndiaUAEoman
#FlocculatingAgents_ManufacturerSupplier

Product Useful Area:

Keyword

Packaging Size

Supply Location

Flocculating Agents manufacturer and supplier in Mumbai, Kandla, Chennai, Ennore, Vizag, Kolkata, surat, NAIROBI, KENYA, Sudan, Muscat Barka Oman, Yemen, fujairah, Dubai, Sharjah, Abudhabi, Ajman, UAE Middle East, Gulf

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Mina Zayed, Khalifa Port, Kizad, Jebel Ali, Port Rashid, Khor Fakkan, Sharjah Creek, Port of Hamriyah, Mussafah Port, Saqr Port, Dibba Port, Jebel Dhanna, Mina Al Hamriya, and all major UAE ports.

Search form

Product Category

Boiler / Cooling Tower Chemicals

Marine Deck Engine Chemicals

Raw Material Chemicals