Scale Inhibitor Open Cooling Water System
Product code RXSOL-43-3302-025
Highly effective scale inhibitor for open cooling water systems. High molecular weight polymer for excellent dispersion as well as scale inhibitor in cooling systems
Description
Scale Inhibitor for Open Cooling Water Systems is a high-performance liquid antiscalant and dispersant specially formulated for open recirculating cooling water systems operating under high hardness and high pH conditions.
- Calcium Carbonate (CaCO₃)
- Calcium Sulphate (CaSO₄)
- Iron deposits
- Suspended solids fouling
Application
Scale Inhibitor for Cooling Water Systems
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost-effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost-effective RO antiscalants will inhibit a wide range of foulants including calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.
RO Antiscalants are dosed directly to the RO feed water tank or feedwater line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase.
A high-performance Antiscalant for RO systems formulated to prevent scale formation and fouling on membrane surfaces. It effectively controls calcium carbonate, calcium sulfate, barium, and strontium scales, even at high recovery rates. The product maintains optimal membrane performance and extends RO membrane life. Suitable for brackish water, seawater, and wastewater reclamation RO systems.
Useful in following scale inhibition treatment
- Open recirculating cooling water systems
- Cooling towers
- Evaporative condensers
- Industrial heat exchangers
- HVAC cooling circuits
- Power plants
- Petrochemical & refinery cooling systems
Precautions
It reduces the risk of scaling and eliminates the use of hazardous acids, resulting in efficient plant operation with highest possible conversion rate.
It is a very effective antiscalant. It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.
Mechanism of Action of Scale Inhibitor
1. Scale Inhibition- Prevents scale formation by:
- Threshold effect (interferes with crystal nucleation)
- Crystal distortion
- Lattice modification
- Keeps suspended solids dispersed
- Prevents iron oxide deposition
- Minimizes sludge accumulation
RXSOL Scale Inhibitor for Cooling Water Systems is the perfect easy to use liquid formulation to get rid of any scale formation in future. Its high molecular weight polymer acts as an excellent dispersant, thereby enabling easier scale inhibition and better scale cleaning.