Sodium Bisulfite 40% Solution

Sodium Bisulfite 40% Solution – Manufacturer & Supplier in UAE

Sodium Bisulfite 40% Solution is a concentrated aqueous solution of sodium bisulfite (NaHSO₃), widely used as a reducing agent, dechlorination chemical, oxygen scavenger and water-treatment chemical in industrial, marine and process-water applications.

It is supplied as a ready-to-use liquid solution for applications where controlled reduction of oxidizing agents, particularly residual chlorine, is required.

Sodium Bisulfite 40% Solution – Product Highlights

• Concentration: 40% Sodium Bisulfite Solution

• Chemical formula: NaHSO₃

• Physical form: Liquid solution

• Appearance: Typically clear to pale yellow liquid

• Highly effective reducing agent

• Used for chlorine and oxidant removal

• Suitable for industrial water-treatment applications

• Used in RO pretreatment systems

• Useful for dechlorination of treated water

• Suitable for industrial and marine applications

• Available in bulk and industrial packaging

Major Applications

1. RO Water Treatment

Sodium Bisulfite 40% Solution is commonly used in reverse osmosis (RO) pretreatment to remove residual free chlorine before water reaches polyamide RO membranes.

This is important because free chlorine can damage or degrade chlorine-sensitive RO membrane materials.

2. Dechlorination

The product is widely used for reducing residual chlorine in:

• Potable-water treatment processes

• Industrial wastewater

• Process water

• RO feed water

• Reclaimed water

• Chemical treatment systems

3. Oxygen Scavenging

Sodium bisulfite can act as an oxygen scavenger in suitable water-treatment applications, helping reduce dissolved oxygen in systems where oxygen control is required.

Applications may include selected:

• Boiler-water systems

• Feed-water treatment

• Industrial water circuits

• Process-water systems

The actual treatment method and dosage should be established according to water chemistry and the applicable technical specification.

4. Industrial Chemical Processing

Sodium Bisulfite Solution is also used as a reducing agent in various chemical and industrial processes where controlled reduction is required.

5. Marine Applications

Sodium bisulfite can be used in marine and shipboard water-treatment applications, particularly where dechlorination or reduction of oxidizing residuals is required.

The requirements for pool water testing in the application of dichlor based products should be indicated on the product label. The primary parameter to be tested is the level of FAC in the water. The choice of testing methods will vary depending on the type of pool (residential or commercial) and local regulations and standards. The product label should recommend that the pool water quality be properly balanced. This requires testing of the pool water balance parameters of pH, alkalinity, calcium hardness, and stabilizer (i.e. cyanuric acid).

Corroision Inhibitor for METAL is a liquid film-forming corrosion inhibitor. For use in ballast tanks, bilges, voids, cofferdams and barges. It  is a blend of organic and inorganic inhibitors. It contains no chromates and is completely soluble in sea water.

Our other valuable products...

Sodium Thiosulphate Pentahydrate - Sugar Crystals
Sodium Thiosulphate Pentahydrate – P Crystals
Sodium Thiosulphate Anhydrous
Sodium Acetate Trihydrate
Sodium Acetate Anhydrous
Sodium Metabisulphite
Sodium Bisulphite
Sodium Sulphate Anhydrous
Sodium Sulphite Anhydrous
Ammonium Chloride - Extra Pure
Ammonium Sulphate - Extra Pure
Magnesium Sulphate Heptahydrate - Extra Pure
Mono Sodium Phosphate - Pure
Di Sodium Phosphate Anhydrous - Pure
Tri Sodium Phosphate Dodecahydrate
Sodium Hexa Meta Phosphate

Keep away from heat as the potential for release of sulfur dioxide fumes exists. Liquid sodium thiosulfate has very low toxicity but routine safety precautions should be practiced. Rubber gloves, safety goggles and protective clothing is recommended. 

Sodium Thiosulfate, wt%30 +/- 2%
Sulfite, wt%1.5 max.
pH 7.0 – 9.0
Physical Properties: 
Specific Gravity @ 25o C 1.252 – 1.34
Density, lbs/gal @ 25o C 10.4 – 11.2

Marine Chemical Supplier BallastGuard STS Solid is suitable for shipowners, ship managers, marine maintenance contractors, shipyards, and vessel operators requiring specialized ballast tank cleaning chemicals. For bulk requirements, customers should request the latest Technical Data Sheet (TDS), Safety Data Sheet (SDS), Certificate of Analysis (COA), dosage instructions, and compatibility information before use.

Oxygen Control

Chemical Oxygen Scavengers. The oxygen scavengers most commonly used in boiler systems are sodium sulfite, sodium bisulfite, hydrazine, catalyzed versions of the sulfites and hydrazine, and organic oxygen scavengers, such as hydroquinone and ascorbate.

It is of critical importance to select and properly use the best chemical oxygen scavenger for a given system. Major factors that determine the best oxygen scavenger for a particular application include reaction speed, residence time in the system, operating temperature and pressure, and feedwater pH. Interferences with the scavenger/oxygen reaction, decomposition products, and reactions with metals in the system are also important factors. Other contributing factors include the use of feedwater for attemperation, the presence of economizers in the system, and the end use of the steam. Chemical oxygen scavengers should be fed to allow ample time for the scavenger/oxygen reaction to occur. The deaerator storage system and the feedwater storage tank are commonly used feed points.

In boilers operating below 1,000 psig, sodium sulfite and a concentrated liquid solution of catalyzed sodium bisulfite are the most commonly used materials for chemical deaeration due to low cost and ease of handling and testing. The oxygen scavenging property of sodium sulfite is illustrated by the following reaction:

Theoretically, 7.88 ppm of chemically pure sodium sulfite is required to remove 1.0 ppm of dissolved oxygen. However, due to the use of technical grades of sodium sulfite, combined with handling and blowdown losses during normal plant operation, approximately 10 lb of sodium sulfite per pound of oxygen is usually required. The concentration of excess sulfite maintained in the feedwater or boiler water also affects the sulfite requirement.

Sodium sulfite must be fed continuously for maximum oxygen removal. Usually, the most suitable point of application is the drop leg between the deaerator and the storage compartment. Where hot process softeners are followed by hot zeolite units, an additional feed is recommended at the filter effluent of the hot process units (prior to the zeolite softeners) to protect the ion exchange resin and softener shells.

As with any oxygen scavenging reaction, many factors affect the speed of the sulfite-oxygen reaction. These factors include temperature, pH, initial concentration of oxygen scavenger, initial concentration of dissolved oxygen, and catalytic or inhibiting effects. The most important factor is temperature. As temperature increases, reaction time decreases; in general, every 18°F increase in temperature doubles reaction speed. At temperatures of 212°F and above, the reaction is rapid. Overfeed of sodium sulfite also increases reaction rate. The reaction proceeds most rapidly at pH values in the range of 8.5-10.0.

The following operational conditions necessitate the use of catalyzed sodium sulfite:

• low feedwater temperature
• incomplete mechanical deaeration
• rapid reaction required to prevent pitting in the system
• short residence time
• use of economizers

High feedwater sulfite residuals and pH values above 8.5 should be maintained in the feedwater to help protect the economizer from oxygen attack.

Some natural waters contain materials that can inhibit the oxygen/sulfite reaction. For example, trace organic materials in a surface supply used for makeup water can reduce speed of scavenger/oxygen reaction time. The same problem can occur where contaminated condensate is used as a portion of the boiler feedwater. The organic materials complex metals (natural or formulated catalysts) and prevent them from increasing the rate of reaction.

Sodium sulfite must be fed where it will not contaminate feedwater to be used for attemporation or desuperheating. This prevents the addition of solids to the steam.

At operating pressures of 1,000 psig and higher, hydrazine or organic oxygen scavengers are normally used in place of sulfite. In these applications, the increased dissolved solids contributed by sodium sulfate (the product of the sodium sulfite-oxygen reaction) can become a significant problem. Also, sulfite decomposes in high-pressure boilers to form sulfur dioxide (SO2) and hydrogen sulfide (H2S). Both of these gases can cause corrosion in the return condensate system and have been reported to contribute to stress corrosion cracking in turbines. Hydrazine has been used for years as an oxygen scavenger in high-pressure systems and other systems in which sulfite materials cannot be used. Hydrazine is a reducing agent that removes dissolved oxygen by the following reaction:

Because the products of this reaction are water and nitrogen, the reaction adds no solids to the boiler water. The decomposition products of hydrazine are ammonia and nitrogen. Decomposition begins at approximately 400°F and is rapid at 600°F. The alkaline ammonia does not attack steel. However, if enough ammonia and oxygen are present together, copper alloy corrosion increases. Close control of the hydrazine feed rate can limit the concentration of ammonia in the steam and minimize the danger of attack on copper-bearing alloys. The ammonia also neutralizes carbon dioxide and reduces the return line corrosion caused by carbon dioxide.

Hydrazine is a toxic material and must be handled with extreme care. Because the material is a suspected carcinogen, federally published guidelines must be followed for handling and reporting. Because pure hydrazine has a low flash point, a 35% solution with a flash point of greater than 200°F is usually used. Theoretically, 1.0 ppm of hydrazine is required to react with 1.0 ppm of dissolved oxygen. However, in practice 1.5-2.0 parts of hydrazine are required per part of oxygen.

The factors that influence the reaction time of sodium sulfite also apply to other oxygen scavengers.  Rate of reaction as a function of temperature and hydrazine concentration. The reaction is also dependent upon pH (the optimum pH range is 9.0-10.0)

Help full link to test bacterials growth in drinking water http://www.rxmarine.com/H2S-vial-Bacteriological-Kit-manufacturer-supplier-test-kit    ,  This test is very simple and can be tested by unskilled / skilled helper both.

 

Feature & Benefit :

• Di Chlor is ideal for use in swimming pools, spas, fountains and water features.
• Powerful sanitizing powder that destroys bacteria, breaks down contaminants and kills algae.
• Calcium-Free formula keeps hard-water pools sparkling clean and crystal clear.
• Fast dissolving di-chlor chlorinating granules leaves no residue.
• Contains premium-quality 56% - 62% available stabilized chlorine.
• High quality granular chlorine, economically and competitively priced.

PRECAUTIONS
 

In order to safely use and handle dichlor products, all individuals involved in their manufacture, distribution, sale, use should be trained and knowledgeable about their properties. Safety information is available on the product label, product MSDS (Material Safety Data Sheet), and manufacturer’s training materials. This safety information will include product and packaging disposal instructions and spill response information.

Dichlor is a dry solid with strong oxidizing properties. It is stable when stored in a cool, dry, ventilated area and not contaminated by other chemicals such as acids or easily oxidizable materials. Dichlor, in the solid form, shall not be mixed with other pool chemicals including other chlorinating agents. Partially empty packages must not be consolidated, as this could result in dangerous mixing with incompatible dry chlorinating agents having a similar appearance.

CAUTION: If mishandled, improperly stored, or contaminated, dichlor products can become unstable and dangerous, as is the case in general with chlorinating agents. Fire, explosion and/or evolution of toxic gasses could result, depending on the nature and amount of the contaminant. As with any oxidizer, dichlor can oxidize metals and may result in staining of pool and spa surfaces.

• Avoid contact with skin and eyes. Avoid breathing mist
• and vapors. Always wear protective gloves, goggles
• and masks. Keep away from oxidizers, acids and
• metallic powders. Refer to MSDS for more information.
   

FIRST AID MEASURES

SKIN  :  Wash exposed areas with water.

EYES :  Flush eyes with plenty of water for 20 mins.

INHALATION :  Remove patient to fresh air.

INGESTION  : Do not induce vomiting.

Give patient a glass of water or milk.

GET MEDICAL ATTENTION IF ALLERGIC REACTION