Dechlorination Soln De Hypo

Get MSDS Technical Bulletin Connect on WhatsApp

Product Code: RXSOL-20-2021-210

Product Short Description: For removal of odors, Colour from surface area. This product also improve permanganate time, This product is very effective. Acts as superior quality cleaner / degreaser .

Product Description:

Dechlorination Soln De Hypo solution is used for removal of odors, Colour from surface area. This product also improve permanganate time, This product is very effective. Acts as superior quality cleaner / degreaser.

A liquid dechlorination agent based on aqueous sodium bisulphite designed for the rapid removal of residual chlorine and other oxidizing halogens from water systems. The product reacts instantly with free chlorine, hypochlorite, and bromine, converting them into harmless chloride salts and sulfate compounds.

It is widely used in reverse osmosis (RO) pretreatment, desalination plants, wastewater treatment facilities, cooling water systems, municipal water treatment, and industrial process water applications where chlorine must be removed prior to sensitive downstream processes.

The product is fast acting, easy to dose, and compatible with most water treatment systems.

Product Application:

These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.

Bleach will –

Remove odors.
Remove color.
Improve permanganate time.

Where is dechlorination liquid used?

Reverse Osmosis Systems

Used upstream of RO membranes to remove residual chlorine and prevent membrane oxidation.

Desalination Plants

Applied before RO trains to protect polyamide membranes.

Wastewater Treatment

Removes residual chlorine before environmental discharge.

Municipal Water Treatment

Neutralizes chlorine in treated water prior to specialized processes.

Cooling Water Systems

Used where dechlorination is required before discharge.

Food and Beverage Industries

Used for chlorine removal in process water systems.

Product Dose:

1 mg/L Free Chlorine requires approximately 1.8 mg/L Sodium Bisulphite (100% basis).

For commercial 38-40% solutions:

Residual Chlorine	Dose
0.5 ppm	1 - 2 ppm
1 ppm	2 - 3 ppm
2 ppm	4 - 6 ppm
5 ppm	9 - 12 ppm

Typical plant practice:

Apply 5–10% excess over stoichiometric requirement.
Maintain ORP according to plant operating procedures.
Residual chlorine after dosing should be:
<0.05 ppm for RO feed water.
Ideally non-detectable for polyamide membranes.

Spraying – Following rough washing to a good Water White or better, apply dilute RXSOL ORG DICHLOR to 1 – 3% strength. First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow to dry) and then rinse very well with DI water, including the tank top towards the sump. To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.

Injection– no.

Re-circulation– Following rough washing to a good Water White standard or better, apply dilute RXSOL ORG DICHLOR to 1-3% strength. Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40 – 50 0 C, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours. After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-85 o C after 45 minutes. Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.

** When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred on between tanks as required.

* Use a strainer at the pump stack when circulating any solution.

Product Note:

Tank Lining – Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).

What are the benefits of using RXSOL Dechlorination Liquid?

Rapid chlorine neutralization
Excellent protection for RO and NF membranes
Fast reaction kinetics
Suitable for continuous dosing
Easy to store and handle
Non-flammable
Economical treatment chemical
Effective against free chlorine and hypochlorite

Remarks:

Performance Characteristics

Instant chlorine removal.
Effective over wide pH range.
Compatible with polyamide RO membranes.
Reduces oxidative membrane degradation.
Minimizes membrane replacement costs.
Suitable for online continuous dosing systems.

Product Tag Identification:

#DechlorinationLIQUID_MuscatDubai
#DeHypo_SharjahMumbai
#ChlorineScavenger_GandhidhamAbudhabi
#ChlorineRemover_CennaiFujairah

Product Useful Area:

Keyword

Packaging Size

Supply Location

Dechlorination Soln De Hypo manufacturer and supplier in Mumbai, Chennai, Kolkata, Visakhapatnam, Gangavaram, Gandhidham Kandla, Hazira Surat, Haldia Paradip, Kakinada, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Barka, Ruwi, Muscat Oman, Yemen, Sudan, Nairobi, Kenya, Canada

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Mina Zayed, Khalifa Port, Kizad, Jebel Ali, Port Rashid, Khor Fakkan, Sharjah Creek, Port of Hamriyah, Mussafah Port, Saqr Port, Dibba Port, Jebel Dhanna, Mina Al Hamriya, and all major UAE ports.

Search form

Boiler / Cooling Tower Chemicals

Marine Deck Engine Chemicals

Raw Material Chemicals