Product Category

Deck cabin galley Maintenance-25
Hand Wash / Personal care-14
Engine room Maintenance-16
Coolant Glycol Antifreeze-27
Rust Clean & Protect-28
Drilling Fluids & Mud Oil Field chemicals-81
Floor Care ( Polish / Cleaner ) -13
Lab Chemical-60
Tank Cleaner-20
Water Filter, Vessel, Softner, Accessory-32
Radiator and AC coil cleaner-39
Raw Chemicals-19
Electrical Cleaner-30
Wall Wash Test Kit-63
Ballast Tank Chem-23
Automobiles-41
House / HOTEL & CATERING-15
Power Plant / Heavy Industries-37
Degreaser-10
Lab Equipment-61
Construction Chem-67
Air Lines-36
Wrench & Tools-65
Textiles / Looms-91
Stains Indicator Reagents-69
Pump & Accessory-21
Oil Spill Chem & Accessory -17
Laundry Chemicals-26
Ship Hold Cleaner-22
Scale Remover-11
Fuel Treatment-70
Detergent & Soap-12
Cooling Water Chemical-43
Carbon Coal Charcoal-26
Asphalt Release / Products-90
Boiler Chemicals-42
Foundry Ind Chemicals-54
Metal Treatment-68
Railway Maintenance-35
RIGS Oil Field-34
Rubber Chemicals-93
Sewage Chemicals Treatment-40
Test Kit For Water-62
Agriculture-94
GREASES-92
Medicine-95
Passivation-38
Railway Maintenance
RO Chemicals-33
Clean Air deodorizer-24
Corrosion Inhibitor-44
Drain Clean Products-29
Evaporator Treat-51
Gasses-66
Leather Chem-96
Paint and Cleaning solvent-18
Safety Item-64
Swimming Pool & Spa-31
Poultry Feed Chemicals-97
Oil Spill Chem & Absorbent -17
--None--
Food Additive-45
Perfumery Raw Materials-47
Containers-48
Battery Chemicals-50
GOLD REFINING CHEMICAL-56
Powder Chemical-46
Solvent Chemicals-19
Pest Control-46
Electro Plating Chemicals-72
Powder Chemical-98
Demulsifier-82
Food-99
Poultry and Animal Feed Additive-97
Water Treatment

Boiler / Cooling Tower Chemicals

Specialized formulatory products for efficient maintenance of boiler units and chiller plants of industries.

View All Water Treatment Chemicals
Corrosion / Scale Control for Boiler +
  • Corrosion Scale Treatment Boiler - RXSOL-42-4029-025
  • One Shot Universal LiquiTreat - RXSOL-50-5001-020
  • MULTIPLUS BWT - RXSOL-50-5011-020
  • Sludge Conditioner - RXSOL-50-5008-020
  • Oxygen Scavenger Plus - RXSOL-50-5022-025
  • Condensol Corrosion Control - RXSOL-50-5005-025
Cooling Tower / Chiller Unit Maintenance +
  • RXSOL 2000 Corrosion Scale Inhibitor - RXSOL-40-2000-025
  • Corrosion Inhibitor MULTI Metal Protection - RXSOL-40-4011-025
  • Biocide MICRO Cooling Water - RXSOL-40-4009-025
  • Corrosion Inhibitor Antifoulant - RXSOL-40-4027-025
  • Antiscalant Antifoulant - RXSOL-33-3302-025
  • Cooling Water Test Kit - RXSOL-62-5508-001
Marine Chemicals

Marine Deck Engine Chemicals

One STOP manufacturer for all of vessel's chemical needs - chemicals, test kits, applicators, etc

View All Marine Chemicals
Deck Engine Maintenance +
  • Heavy Duty Degreaser - RXSOL-10-1005-025
  • TPOL Heavy Duty - RXSOL-20-T300-025
  • All Purpose Cleaner - RXSOL-12-1501-020
  • Fuel Emulsion Breaker - RXSOL-70-7003-020
  • Evaporator Treatment - RXSOL-51-6001-020
  • Electrosol Electrical Cleaner - RXSOL-16-1009-025
  • Carbon Remover - RXSOL-16-1003-025
  • Rust Stain Remover RSR - RXSOL-13-1096-025
  • Enviro Degreaser Cleaner - RXSOL-20-3001-025
  • Hand Cleaner Paste - RXSOL-16-1001-001
Ship Hold Tank Cleaning+
  • Slip Barrier Coat HOLD - RXSOL-22-2210-210
  • RXTuff High Foam - RXSOL-22-3019-210
  • Metal Clean Bright HD - RXSOL-20-1011-020
  • Coal Remover RX Hold - RXSOL-22-2215-210
  • RXSOL PCS Pet Coke Cleaner Hold - RXSOL-22-2208-025
  • Acqua Tuff High Foam - RXSOL-22-3033-210
  • Alkaline Safety Liquid - RXSOL-20-2005-026
Raw Materials

Raw Material Chemicals

Ready stock of fast-running chemical raw materials in 6 key locations of India

View All Chemicals
Inorganic / Organic Powders+
  • Caustic Soda
  • Caustic Potash
  • Sodium Nitrite
  • Sodium Bisulphite
  • Sodium Bicarbonate
Detergent Manufacturing Products+
  • Acid Slurry
  • SLES
  • SLS
  • Nonyl Phenol Ethoxylates
Other Products+
  • Hydrochloric Acid
  • Sodium Hypochlorite
  • Phosphoric Acid
  • Mono Ethylene Glycol

Polyacrylamide PAM Emulsion Waste Water Treatment

Product Code: RXSOL-40-4160-210

Categories: Sewage Chemicals Treatment-40
Product Short Description: Efficient flocculant and coagulant for settling of inorganic suspended solids, effluent water from suspended particles together in industrial and municipal processes
Product Description:

RXSOL PAM Emulsion 1630

Product Code: RXSOL-34-4160-025

Product Description

RXSOL PAM Emulsion 1630 is a high-performance polyacrylamide (PAM) emulsion formulated for efficient solid-liquid separation in water and wastewater treatment applications. The active polyacrylamide polymer is dispersed in an oil phase using inverse-emulsion technology, providing a convenient liquid polymer with rapid activation in water.

RXSOL PAM Emulsion 1630 functions as an effective flocculant, promoting the aggregation of fine suspended and colloidal particles into larger, stronger flocs. This improves settling, clarification, flotation and sludge dewatering performance in a wide range of industrial processes.

Unlike conventional dry polyacrylamide powders that require extended preparation and maturation time, RXSOL PAM Emulsion 1630 inverts and dissolves rapidly when properly dispersed in water, typically developing within approximately 5–15 minutes, depending on water quality, temperature, concentration and mixing conditions.

 

Anionic Polyacrylamide Flocculant

Anionic Polyacrylamide Flocculant is an medium anionic charged polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.

Product Application:

Applications

RXSOL PAM Emulsion 1630 is suitable for a wide range of solid-liquid separation processes, including:

  • Municipal sewage and wastewater treatment
  • Industrial effluent treatment
  • Sludge thickening and dewatering
  • Clarification and sedimentation
  • Dissolved Air Flotation (DAF) systems
  • Paper and pulp processing
  • Textile and dyeing wastewater treatment
  • Coal washing and mineral processing
  • Mill and process wastewater treatment
  • Oilfield and drilling-water treatment
  • Produced-water treatment
  • Mining and mineral-processing applications
  •  

It is used for effluent treatment of inorganic suspended solids found in chemical, Fishery, food, textile, dye, other effluent water, mining and coal washing waste water, metal processing, etc.

Product Dose:

The dosage range of Anionic Polyacrylamide Flocculant  Anionic Polyelectrolyte Powder varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of Anionic Polyacrylamide Flocculant  Anionic Polyelectrolyte Powder.

Jar Test: Put sample of effluent in a beaker and add Anionic Polyacrylamide Flocculant Powder as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.

Procedure and precautions upon dispersion and dissolving flocculants:-

Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration, and then dilute the flocculant mixture immediately before use.

Product Note:

Uses

RXSOL PAM Emulsion 1630 is used where rapid and efficient flocculation of suspended solids is required. It helps improve floc formation, settling rate, water clarity, sludge concentration and dewatering efficiency, while potentially reducing the overall volume of sludge requiring handling and disposal.

 

The product is particularly suitable for applications requiring a liquid polymer that can be prepared more rapidly than conventional dry PAM products and integrated into continuous chemical dosing systems.

 

Handling measures and precautions : 

Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage: 
 
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight.

Remarks:

Polyacrylamide PAM Emulsion Waste Water Treatment

Product Name: RXSOL Polyacrylamide PAM Emulsion Waste Water Treatment
Product Code: RXSOL-40-4160-210
Product Type: Liquid Polyacrylamide Flocculant

Product Description

RXSOL Polyacrylamide PAM Emulsion RXSOL-40-4160-210 is a high-performance liquid polymer flocculant developed for water treatment, wastewater clarification, sludge dewatering and industrial solid-liquid separation processes.

The product is manufactured as a concentrated polyacrylamide emulsion in which the polymer is maintained in a readily activatable liquid form. Upon correct dilution and inversion in water, the polymer rapidly develops into an effective flocculating solution.

RXSOL PAM Emulsion combines high molecular weight, rapid activation, good storage stability and efficient flocculation performance. Compared with conventional dry polyacrylamide powders, the liquid emulsion can significantly reduce polymer preparation and maturation time, making it particularly suitable for continuous industrial dosing systems.

The activated polymer adsorbs onto suspended particles and forms bridges between individual particles, producing larger and stronger flocs. These flocs can then be more efficiently removed through sedimentation, clarification, flotation, filtration or mechanical sludge dewatering.

Key Features

  • High-efficiency liquid polyacrylamide flocculant

  • High molecular weight polymer

  • Rapid inversion and dissolution in water

  • Typical activation/dissolution within approximately 5–15 minutes

  • Excellent suspended-solids agglomeration

  • Promotes formation of large and strong flocs

  • Improves sedimentation and clarification

  • Enhances sludge dewatering performance

  • Suitable for continuous chemical dosing

  • Lower preparation time compared with conventional dry PAM

  • Effective at relatively low treatment dosages

  • Suitable for a wide range of industrial wastewater applications

Typical Specifications

Property Typical Value
Product Name RXSOL Polyacrylamide PAM Emulsion
Product Code RXSOL-40-4160-210
Physical Form Liquid emulsion
Appearance Milky white to off-white viscous emulsion
Polymer Type Polyacrylamide-based emulsion
Solid Content Typically 30–40%*
Ionic Character Grade dependent*
Molecular Weight High
pH Typically 4–8*
Dissolution / Activation Time Approx. 5–15 minutes
Solubility Disperses and activates in water
Primary Function Flocculation / solid-liquid separation
Application Water and wastewater treatment

*Final specifications should be established according to the selected RXSOL polymer grade and production batch.

Product Tag Identification:

#AnionicPolyacrylamideFlocculant
#Flocculant
#Polyacrylamide
#FlocculatingAgent

Product Useful Area:

Keyword

Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Mumbai, Kandla, Mundra, Kolkata, Howrah, Vishakhapatnam, Chennai, India.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Fujairah, Dubai, Abu Dhabi, Sharjah, Ajman, UAE Middle East.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Muscat Barka Oman.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Nairobi Mombasa Kenya Africa, Canada.

Packaging Size

Supply Location

Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Gulf, Yemen,UAE Middle East, Ruwi, Ghala, Muscat Barka Oman, Nairobi Kenya Africa, Mumbai, Kandla, Kolkata, Vishakhapatnam, Chennai, India, Canada, Nairobi Kenya, Sudan

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Mina Zayed, Khalifa Port, Kizad, Jebel Ali, Port Rashid, Khor Fakkan, Sharjah Creek, Port of Hamriyah, Mussafah Port, Saqr Port, Dibba Port, Jebel Dhanna, Mina Al Hamriya, and all major UAE ports.