Manual Cleaning

For manual cleaning of separator parts and machinery parts.Make a solution between 5-20% concentration depending on how dirty Tank and  equipment to be cleaned is. Both oil and lime will be solved with time, let soak for at least 2 hours. After 2 hours the parts can be cleaned using by High Pressure Machine rinsing or brushing.

Cleaning In Place of Separator

For the lube oil separator use a 20% solution

For the fuel oil separator use a 10% solution

Recommended cleaning temperature is 70-90oC (158-194oF). A normal cleaning cycle is between 1 to 3 hours depending on the dirtiness and character. If the separator has very hard deposits the cleaning cycle may have to be repeated with new cleaning fluid.

Lube Oil Tank :

• Instead of recirculation cleaning the  RXSOL  Lube Oils Cleaner  can  injected into the Butter   worth system . Kindly make the solution 0.5 -5% and inject same. Depending on the tank size  and  height  fill  the  necessary  amount of  freshwater or  seawater  into  the  service  tank .
• Butter worth all tanks to be  cleaned 1-1,5  hour  using  the water from the service tank .
• Heat  the  water by  means  of  heating  coils,  cargo  heat exchanger or going via the Butter worth heater.
• The pre-cleaning temperature should be between 70 and 80°C.
• Pump the waste water from the tanks to be cleaned back to service tank (overtop).