Product Category

Water Treatment

Boiler / Cooling Tower Chemicals

Specialized formulatory products for efficient maintenance of boiler units and chiller plants of industries.

View All Water Treatment Chemicals
Corrosion / Scale Control for Boiler +
  • Corrosion Scale Treatment Boiler - RXSOL-42-4029-025
  • One Shot Universal LiquiTreat - RXSOL-50-5001-020
  • MULTIPLUS BWT - RXSOL-50-5011-020
  • Sludge Conditioner - RXSOL-50-5008-020
  • Oxygen Scavenger Plus - RXSOL-50-5022-025
  • Condensol Corrosion Control - RXSOL-50-5005-025
Cooling Tower / Chiller Unit Maintenance +
  • RXSOL 2000 Corrosion Scale Inhibitor - RXSOL-40-2000-025
  • Corrosion Inhibitor MULTI Metal Protection - RXSOL-40-4011-025
  • Biocide MICRO Cooling Water - RXSOL-40-4009-025
  • Corrosion Inhibitor Antifoulant - RXSOL-40-4027-025
  • Antiscalant Antifoulant - RXSOL-33-3302-025
  • Cooling Water Test Kit - RXSOL-62-5508-001
Marine Chemicals

Marine Deck Engine Chemicals

One STOP manufacturer for all of vessel's chemical needs - chemicals, test kits, applicators, etc

View All Marine Chemicals
Deck Engine Maintenance +
  • Heavy Duty Degreaser - RXSOL-10-1005-025
  • TPOL Heavy Duty - RXSOL-20-T300-025
  • All Purpose Cleaner - RXSOL-12-1501-020
  • Fuel Emulsion Breaker - RXSOL-70-7003-020
  • Evaporator Treatment - RXSOL-51-6001-020
  • Electrosol Electrical Cleaner - RXSOL-16-1009-025
  • Carbon Remover - RXSOL-16-1003-025
  • Rust Stain Remover RSR - RXSOL-13-1096-025
  • Enviro Degreaser Cleaner - RXSOL-20-3001-025
  • Hand Cleaner Paste - RXSOL-16-1001-001
Ship Hold Tank Cleaning+
  • Slip Barrier Coat HOLD - RXSOL-22-2210-210
  • RXTuff High Foam - RXSOL-22-3019-210
  • Metal Clean Bright HD - RXSOL-20-1011-020
  • Coal Remover RX Hold - RXSOL-22-2215-210
  • RXSOL PCS Pet Coke Cleaner Hold - RXSOL-22-2208-025
  • Acqua Tuff High Foam - RXSOL-22-3033-210
  • Alkaline Safety Liquid - RXSOL-20-2005-026
Raw Materials

Raw Material Chemicals

Ready stock of fast-running chemical raw materials in 6 key locations of India

View All Chemicals
Inorganic / Organic Powders+
  • Caustic Soda
  • Caustic Potash
  • Sodium Nitrite
  • Sodium Bisulphite
  • Sodium Bicarbonate
Detergent Manufacturing Products+
  • Acid Slurry
  • SLES
  • SLS
  • Nonyl Phenol Ethoxylates
Other Products+
  • Hydrochloric Acid
  • Sodium Hypochlorite
  • Phosphoric Acid
  • Mono Ethylene Glycol

LIME Marine Water Scale Remover

Product Code: RXSOL-16-1747-025


Categories: Scale Remover-11
Product Short Description: LIME Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water system
Product Description:

RXSOL MARINE WATER SCALE REMOVER

Product Code: RXSOL-25-1747-025

Specialized Descaling Chemical for Marine Water Systems, Seawater Pipelines, Heat Exchangers and Industrial Equipment

RXSOL Marine Water Scale Remover is a specialized chemical cleaning product designed to remove mineral scale, calcium carbonate deposits, magnesium-based deposits, salt-related encrustations and other inorganic fouling from compatible marine water systems and industrial equipment.

Marine water systems frequently experience scaling due to the presence of dissolved calcium, magnesium and other mineral salts in seawater and freshwater. Over time, these deposits accumulate on internal surfaces, reducing water flow, restricting heat transfer and affecting equipment performance.

RXSOL Marine Water Scale Remover is intended to dissolve and loosen stubborn mineral deposits, helping restore system cleanliness, improve water circulation and support efficient operation.

The product is suitable for controlled chemical descaling of compatible seawater cooling systems, heat exchangers, marine pipelines, pumps, condensers and associated water-handling equipment.

LIME Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems. RXLYME Marine is formulated to meet the demands of today's water systems. LIME Marine  is non-corrosive, non-hazardous, and biodegradable . With the reduction of labour and operating costs, downtime, and no installation costs, accompanied with the heavy duty cleaning power, LIME Marine keeps your vessel at sea generating revenue.

Product Application:

Key Features & Benefits

  • Effective removal of calcium carbonate and common mineral scale deposits.

  • Helps dissolve hard water scale and seawater-related encrustations.

  • Suitable for marine and industrial water system maintenance.

  • Helps restore water flow through scaled pipelines and equipment.

  • Improves heat-transfer performance where mineral deposits cause fouling.

  • Reduces the need for extensive mechanical descaling.

  • Suitable for controlled circulation and immersion cleaning.

  • Useful for preventive and corrective maintenance programmes.

  • Can assist in cleaning difficult-to-access internal passages.

  • Supports maintenance of marine cooling and water circulation systems.

Major Applications

Marine Seawater Cooling Systems

Used for removing mineral deposits from compatible seawater cooling circuits, pipelines and cooling equipment.

Heat Exchangers

Helps dissolve scale deposits on compatible heat-transfer surfaces, improving thermal performance where fouling has reduced efficiency.

Marine Condensers

Suitable for controlled descaling of compatible condenser tubes and associated water passages.

Seawater Pipelines

Assists in removing mineral encrustations and scale deposits that restrict internal flow.

Pumps and Valves

Can be used to clean compatible dismantled components affected by hard water scale and mineral accumulation.

Freshwater Generators and Evaporators

Suitable for selected descaling applications, subject to equipment manufacturer recommendations and material compatibility.

Industrial Water Systems

Used in compatible cooling circuits, process water pipelines and industrial equipment affected by mineral scale.

Safety & Handling

  • Read the latest product Safety Data Sheet before use.

  • Wear suitable chemical-resistant gloves, goggles and protective clothing.

  • Avoid skin and eye contact.

  • Provide adequate ventilation.

  • Do not mix with chlorine-containing chemicals, hypochlorite or other cleaning agents.

  • Use compatible pumps, hoses, tanks and dosing equipment.

  • Monitor the cleaning process to avoid excessive metal exposure.

  • Collect and dispose of spent cleaning solutions in accordance with applicable regulations.

If the product contains acid, additional precautions may be required for corrosivity, hydrogen generation with reactive metals and carbon dioxide release during carbonate scale dissolution.

Storage

Store in the original tightly closed container in a cool, dry, well-ventilated area.

Protect from direct sunlight, excessive heat and incompatible chemicals.

Keep containers properly labelled and use suitable secondary containment.

Packing

Product Name: Marine Water Scale Remover Product Code: RXSOL-25-1747-025 Packing Size: 25 Litres

Other bulk packing arrangements may be considered subject to availability.

This safe and simple solution effectively dissolves rock-like scale deposits that contaminate your water-cooled marine equipment. LIME Marine is used at ambient temperature and then circulated to bring the solution in contact with the accumulated minerals. The reaction results in a slight foaming or bubbling action, indicating the deposits are actually dissolving into solution, and then simply water flush away! These scale deposits, along with zebra mussels and tiger shells, damage your equipment and reduce your water system performance. Historically, these problems have been addressed via harsh acids, mechanical methods, ion exchange, polyphosphates, permanent magnets and electronic conditioning. If your vessel is heat exchanger cooled, keel cooled, or radiator cooled, try LIME Marine and ride the waves with maintenance superiority.

Product Dose:

Directions for Use

A. Circulation Cleaning Method

Recommended for compatible heat exchangers, seawater pipelines, condensers and closed water circuits.

  1. Shut down and isolate the equipment to be cleaned.

  2. Drain the system and remove loose debris where practical.

  3. Inspect the system materials and confirm chemical compatibility.

  4. Prepare the descaling solution at the concentration specified in the product TDS.

  5. Circulate the solution through the scaled system using a suitable chemical-resistant pump.

  6. Monitor scale dissolution, solution condition and relevant process parameters.

  7. Continue circulation until the required cleaning endpoint is achieved.

  8. Drain and collect the spent cleaning solution.

  9. Rinse thoroughly with clean water until the required post-cleaning conditions are achieved.

  10. Neutralize or passivate the system where required by the equipment maintenance procedure.

Important: If the formulation is acid-based, monitor gas evolution and avoid operating the cleaning circuit as a sealed, unvented system.

B. Immersion Cleaning Method

Suitable for compatible dismantled components.

  1. Place the components in a chemically resistant cleaning tank.

  2. Prepare the descaling solution according to the approved TDS.

  3. Immerse the components in the solution.

  4. Allow sufficient contact time for scale dissolution.

  5. Inspect periodically and remove loosened deposits where necessary.

  6. Remove the components and rinse thoroughly with clean water.

  7. Dry and protect the cleaned components as required.

C. Manual Cleaning Method

For accessible compatible surfaces, apply the product using an approved chemical-resistant applicator.

Allow controlled contact with the scale deposit, then rinse thoroughly. Avoid allowing concentrated chemical to remain on sensitive surfaces.

LIME Marine should be used as directed and at any temperature within the operating limits between 0°F / -18°C and 180°F / 82°C. If the solution does freeze, slush or thicken at the lower operating temperatures, and then thaws, there will be no performance reducing results. Please consult the manufacturer when temperatures above 180°F are encountered.
RXLYME Marine should be applied at ambient temperatures with no heating required. The solution is exothermic, but does not develop a substantial increase in temperature while dissolving water scale, rust, mussels, barnacles, zebra mussels, tiger shells and other water formed deposits.

Product Note:

Types of Deposits Removed

Deposit Type

Expected Cleaning Action

Calcium Carbonate Scale

Dissolution with a suitable descaling formulation

Magnesium Carbonate Deposits

Chemical dissolution

Hard Water Scale

Removal of common carbonate-based deposits

Seawater Mineral Encrustation

Loosening and dissolution of susceptible mineral deposits

Mineral Fouling in Heat Exchangers

Helps restore clean heat-transfer surfaces

Salt Deposits

Removal where soluble or chemically susceptible

Calcium Sulphate Scale

Effectiveness depends on formulation and deposit structure

Silica-Based Scale

May require a specialized cleaning chemistry

Note: Not all mineral scales respond equally to the same descaling chemical. Silica-rich, sulphate-rich and mixed biological/mineral deposits may require different treatment methods.

 

Advantage :

  • The solution does not deteriorate, oxidize, saponify, thicken or lose effectiveness for at least five years.
  • The solution is of a pleasant or characteristic odor, very similar to cherries, and does not exude any obnoxious or toxic vapors. In rare instances, problematic vapors may occur when encountering high concentrations of sulfur or chlorine. Please contact the manufacturer before proceeding under these circumstances.
  • The solution does not require neutralizers and it is free rinsing with water.
  • The solution has the ability to dissolve deposits from some equipment while in operation and without shutdown, if auxiliary coolers are incorporated.
  • The solution has the properties to be mailed or shipped by any private or commercial carrier without restrictions. Air carriers for emergency deliveries may ship LIME Marine via next day air.
  • No Need circulate material for more than a four-hour period without consulting the manufacturer. Most LIME Marine cleaning applications can be accomplished within an average of two to four hours.Please use material only as directed.

This allows the solution to be water flushed down normal plant sewers. Check with local ordinances and regulations in your area prior to disposal.

Our company is holding no-1 RXSOL Brand Descaling Boilers Chemical as a  Descaling Chemicals Manufacturers, Descaling Chemicals Wholesale Suppliers, Descaling Chemical suppliers, dealers, distributors India and Descaling Chemical exporters for UAE. 

We have supply network in Rabale, Navi Mumbai, Mumbai, Surat, Kandla, Gandhidham, Mundra, Sikka, Chennai, Ennore, Vizag, Visakhapatnam, Kakinada, Kolkata, haldia, Paradip, Fujairah, Dubai, Middle East

Remarks:

LIME Marine does not corrode, erode, attack, oxidize or have other deleterious affects on virtually any metal or materials found in marine water systems such as: BRASS, IRON, LEATHER, CERAMIC ,WOOD, FIBER, PLASTICS FIBERGLASS, COPPER, STEEL, TITANIUM ,COPPER NICKEL ,RUBBER, GLASS, GELCOATS PAINTED SURFACES.

LIME Marine is an electrolyte, as are most cleaning agents. An electrolyte is any liquid that will transfer small electrical currents. Examples: salt water, vinegar, Coca-Cola. An electrolyte may cause plating in some types of equipment. This means a transfer of small amounts of one metal onto another metal according to the galvanic corrosion chart. In some instances, a thin coating of copper may be plated onto a steel drum while circulating an electrolyte such as RXLYME Marine. The only time plating occurs is when two dissimilar metals are in an electrolyte solution.

It is recommended, but not mandatory, that the LIME Marine solution be thoroughly mixed before using. Some settling of a dark precipitate may occur, resulting in an amber colored liquid, but has no negative affects upon the performance of the solution.
 

Industries & Applications

  • Marine and shipping industry

  • Ship repair and dry-docking

  • Offshore support vessels

  • Marine engine cooling systems

  • Seawater cooling installations

  • Industrial heat exchangers

  • Power generation facilities

  • Desalination plants

  • Industrial water treatment

  • Mechanical maintenance contractors

Product Tag Identification:

LIME Marine has the ability to dissolve approximately 1 Kg of calcium carbonate scale per 3.75 Ltrs in concentrated form. If the LIME Marine is diluted, it will still dissolve 1 Kg of carbonate scale per 3.75 Ltrs, but will require additional circulating time.
The concentrated solution can be held safely in the open hand without deleterious affects. It will however cause a stinging sensation when contact is made on an open wound or cut. If this occurs, simply rinse thoroughly with soap and water.

Product Useful Area:
RXSOL Descaling and Barnacle removal Liuid also suitable to clean AC heat exchanger coils of yachts Ships. Also suitabl for flushing heat exchanger for engines.

Technical Recommendation

For the most effective descaling programme, identify the deposit composition and equipment metallurgy before selecting the chemical concentration and cleaning procedure.

A complete marine water system cleaning programme may include preliminary flushing, chemical descaling, thorough rinsing, inspection and suitable post-cleaning corrosion protection.

 

RXSOL CHEMO PHARMA INTERNATIONAL

Product: Marine Water Scale Remover Product Code: RXSOL-25-1747-025 Category: Marine Maintenance Chemicals / Descaling Chemicals

Website: www.rxmarine.com

Keyword

Advantages of Chemical Descaling

Marine water systems often contain complex pipework and equipment that are difficult to clean mechanically.

Chemical descaling can offer several operational advantages:

  • Reaches internal surfaces that are inaccessible to brushes.

  • Helps remove mineral deposits without dismantling every component.

  • Reduces cleaning effort in suitable circulation systems.

  • Improves water flow where scale has caused restrictions.

  • Supports recovery of heat-transfer efficiency.

  • Helps reduce maintenance-related downtime.

Cleaning effectiveness depends on scale composition, deposit thickness, chemical concentration, temperature, circulation and contact time.

Material Compatibility

Before using RXSOL Marine Water Scale Remover, verify compatibility with all wetted materials, including:

  • Carbon steel

  • Stainless steel

  • Copper and copper alloys

  • Brass and aluminium brass

  • Copper-nickel alloys

  • Aluminium

  • Galvanized steel

  • Rubber seals and gaskets

  • Plastic components and protective coatings

Special attention: Marine heat exchangers frequently contain copper-nickel, aluminium brass or other sensitive alloys. Acidic descaling products can attack these materials if the chemistry, inhibitor package, concentration or contact time is unsuitable.

Do not assume universal compatibility. A controlled compatibility assessment and equipment manufacturer approval are recommended.

LYME MARINE is scale dissolving chemicals. Lyme marine descaler effectively cleans fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems.

Packaging Size

Supply Location

LIME Marine manufacturer and supplier in Mumbai, Kandla, Vizag - Visakhapatnam, Chennai - Ennore, Kolkata - Haldia - Paradip, Fujairah - Dubai, Abu Dhabi - Sharjah, Muscat Barka RUWI,  Oman Sohar, Nairobi Kenya Uganda Africa

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Mina Zayed, Khalifa Port, Kizad, Jebel Ali, Port Rashid, Khor Fakkan, Sharjah Creek, Port of Hamriyah, Mussafah Port, Saqr Port, Dibba Port, Jebel Dhanna, Mina Al Hamriya, and all major UAE ports.