The  Rxsol -16-1007-025 to be used depends on two factors: the volumetric capacity of the filter to be cleaned and the degree of deposition/contamination in the filter. In the first case, the dosage must equal the filter capacity. In the second case, the dosage must be corresponding to the desired degree of cleaning.

Application and use :

The  RXSOL -16-1007-025 to be used depends on two factors: the volumetric capacity of the filter to be cleaned and the degree of deposition/contamination in the filter. In the first case, the dosage must equal the filter capacity. In the second case, the dosage must be corresponding to the desired degree of cleaning.

RXSOL -16-1007-025 use by the circulation or immersion method. If using the circulation method, determine the filter capacity and circulate at a constant rate for 6–20 hours. If using the immersion method, let the filter soak in enough quantity of Rxsol -16-1007-025, analogous to the degree of contamination, for a time of 6–20 hours. The Temperature of Cleaning solution should not be allowed to exceed 60 °C.

Cleaning process and requirement of time  depends on the type of the contamination. With fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh.

RXSOL -16-1007-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
MESH CONTAMINATED WITH HEAVY OIL:

Elements contaminated with heavy oil must be soaked in a standard commercial aromatic solvent. After soaking the elements are cleaned by high pressure Cleaning Device using RXSOL-16-1095-025 solution.